Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

11.06.2025 13:55

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Because the load is inductive, the current lags the voltage.(by a bit).

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Aryna Sabalenka Breaks Silence On Eyebrow-Raising Coco Gauff Remarks — And People Have Thoughts - HuffPost

Barnstars:

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

One

New rabies cases detected in SLO County. How to avoid deadly disease - San Luis Obispo Tribune

These are simplified answers to the original question, and does not change anything I wrote above.

An AC voltage/ current source, and an ac inductive load.

[old diagram got deleted by accident]

Why is Eric Clapton so roundly disliked among guitarists?

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

The MOV will conduct when the voltage exceeds 50% of line voltage.

a photo is worth a thousand words.

Experiment Reveals What Prolonged Fasting Actually Does to The Human Body - ScienceAlert

Can the fuse protect the electronic devices from lightning instead of a surge protector.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

How come I can't stay sober?

These devices are installed between the “hot” and “neutral” and protective ground.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

At one ohm, the resistor has a maximum of 1 watt power.

Scientists discover 230 new giant viruses that shape ocean life and health - Phys.org

but I think this circuit , shows a few more pieces.

The third is lightning and “how it gets conducted into a home.”

First Sentence:

What is the XXX XXX Keerna Kappor video?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Upvotes:

"Sixth sense" found in animals, changing science's view of sound - Earth.com

2024–10–14 [Omar Gharbi Omar Gharbi ]

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

2024–10–10[John johnson John Johnson ]

Have you ever been forced into bestiality?

2024–10–16 [ OO OLAOYE OYEBODE ]

so, what happens?

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Why is Reagan seen as the best president in the USA when he literally destroyed the American economy with trickle down system and was strongly against worker unions?

This device then solves the entire problem.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

This is 'the assistant's answer'

FAA will restrict flights at Newark airport through end of year - NJ.com

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

what exactly is a ‘surge’ protector?

The other is “what does a “fuse” do?”

There’s a Fascinating Hidden Reason That So Many High-Earning Tech Workers Are Getting Laid Off Now - futurism.com

This is where the MOV conducts again, and dissipated the energy.

One is “what exactly is in a ‘surge protector’ ? ”

But it can get overloaded, and no longer works.

Have you ever regretted not hitting on a older women?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

I post the exact comment here.

There are two important concepts here.

A circuit breaker is similar, but is resettable.

This is where this question deviates from being a 'generic' question, and becomes more specific.

He then asserts :

nine

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Edit 2024–10.

What is lightning?

This one hit behind the barn.

In schematic diagrams this is the symbol for a fuse:

the problem then depends on "how fast does the fuse operate?".

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

It also is a device that limits the change in current flow.

A fuse is a non-resetable over current circuit protector.

Now when you have a certain ac resistance, then a current flows in a loop.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

So, the voltage could go up to 500 volts, and the fuse will not open up.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

There are three different concepts here that are getting confused.

The bolt then partially travels down the line to your home.

But… the neutral is now “floating” because of the 1 ohm resistance.

For this case there are devices called Metal oxide varistors (MOV).

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

It seems Mohan does not understand the difference between a comment and an Answer.

[image of Common-mode choke]

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

He then describes Rainy Season and Lightning.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

(Dc diagram shown, AC is similar).

Here is a simplified AC power diagram.

What does a fuse do?

At least they know the answer if they wanted it.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

He then describes the function of a fuse.

eight

but this device (an Inductor) … impedes the rapid changes in the current.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.